Description
SPECIFICATIONS
Brand Name: NONE
Certification: CE
High-concerned chemical: None
Item Type: Car Jacks
Origin: Mainland China
Instructions for use
1 Before lifting, park the vehicle on a level and hard road and tighten the handbrake
Stop the wheel from moving, turn on the hazard warning sign.
2 Block the wheel diagonally opposite to the replacement tire, loosen the replacement nut, but
do not unscrew
3 Take out the jack and use a rocker or wrench to raise the jack to a suitable height first.
Spend
Four
Put the jack under the jacking part specified by the car factory and turn it clockwise
The handle makes the jack saddle contact the jacking part, and check whether the contact is safe.
fully reliable
5 Then shake the handle to lift the vehicle to a suitable height, replace the tire,
Tighten the nut
Precautions:
1 Remember to overload!
2 In order to ensure the normal use of the jack, please keep the jack thread clean
and lubrication. Before each use, please apply enough oil on the lead screw!
three
This product can only be supported, not used as a fixed support. When supporting the vehicle,
It is strictly forbidden to enter the bottom of the car!
4. Stop using it immediately if it is skewed during the erection process, and after adjusting the position
1 Before lifting, park the vehicle on a level and hard road and tighten the handbrake
Stop the wheel from moving, turn on the hazard warning sign.
2 Block the wheel diagonally opposite to the replacement tire, loosen the replacement nut, but
do not unscrew
3 Take out the jack and use a rocker or wrench to raise the jack to a suitable height first.
Spend
Four
Put the jack under the jacking part specified by the car factory and turn it clockwise
The handle makes the jack saddle contact the jacking part, and check whether the contact is safe.
fully reliable
5 Then shake the handle to lift the vehicle to a suitable height, replace the tire,
Tighten the nut
Precautions:
1 Remember to overload!
2 In order to ensure the normal use of the jack, please keep the jack thread clean
and lubrication. Before each use, please apply enough oil on the lead screw!
three
This product can only be supported, not used as a fixed support. When supporting the vehicle,
It is strictly forbidden to enter the bottom of the car!
4. Stop using it immediately if it is skewed during the erection process, and after adjusting the position
reuse.



















Reviews
There are no reviews yet.